Omni-T range Induction Loop System
Our objectives have been to design and develop a range of ruggedized Induction Loop devices for public area spaces.
These products are essential for public reception areas due to the Disability Discrimination Act (DDA 2005) which allows people with impaired hearing to easily communicate with desk staff as well as to access public announcements.
The Omni-T150 and T100 Audio Frequency Induction Loop Systems (AFILS) are designed to provide an assistive listening facility for individuals with Inductive Loop Pick-up hearing aids, in local areas where a full room system is either not required or is impractical. They are designed to comply with IEC118-4 standards for Induction Loop Assistive Listening Systems and with EN61000-2-7, EMC standards. They also meet or exceed the requirements for European product quality standards and are CE marked.
Omni-T 150 Induction Loop
The
Omni-T150 Induction Loop is a self-contained unit, comprising an efficient aerial housed in an IP65 casing situated within a stainless steel housing (painted blue to RAL5010, although other colours available on request). The unit has been designed specifically for external use with its IP65 rating and virtually vandal proof housing. It works in much the same way as a typical speaker and has a range in excess of 1.5 metres. Without the requirement for external power (if driven by 100v speaker line), this makes the T150 ideal for larger concourses.
The Omni T150 has been endorsed by Network Rail (PADS 089/000013) for use on both over-ground and sub-surface (section 12) platforms.
Dimensions:
250x250x120mm (Post mounted)
250x250x68mm (Wall mounted)
Features:
- Solid State Construction
- 1.5 Metre radial field
- Line or 100v PA system input
- Small profile
- Easy Application Instructions
- Weatherproof and vandal resistant
- Convenient rage for individual stations
Advantages:
- Simplified wiring: The Omni T150 can be connected to existing 100v speaker line
- No need to extend a high current induction loop cable from a central location
- No need to provide mains electrical power supply to a remote induction loop
- Maintenance free
Omni-T 100 Induction Loop System
The
Omni-T100 Induction Loop System comprises an aerial and amplifier. The Aerial housing is manufactured in stainless steel and has 20mm cut-outs on the rear of the housing allowing for mounting onto a standard electrical conduit box for cable management and ease of installation. This model has been specifically designed for areas with restricted access measuring just 75x187x46mm. It has a 1 metre range and is ideal for receptions, help desks, corridors, lifts and carriages.
The T100 is of stainless steel construction (as with the Omni T150) and is available in a choice of colours to blend in with existing decor and design (RAL 5010 as standard).
The T100 can also be used as a passive unit in conjunction with existing PA systems.
OMNI-T Desktop System
The
NEW Omni-T Desktop System has been designed for applications where size restrictions are a governing factor. The Omni-T Desktop System will fit into a 90mm footprint and measuring just 145mm in height it becomes less obtrusive than conventional desktop loops, making this unit ideal for counter and desktop applications.
The unit has a range in excess of 1metre and is constructed in aluminium, anodised in a range of colours.
Endorsed by Network Rail 
4307
